| |
Megol Hydraulikoel HLP 22
HLP hydraulic oils are mineral oils that are used as pressure fluids in hydraulic systems. They contain
active ingredients to increase ageing resistance, anti-corrosive properties and EP properties. As a
result of these additives they satisfy all requirements and are primarily used in hydraulic systems in
which high thermal stresses occur, corrosion can form due to water and whose pumps or hydraulic
motors require oil types with wear protection agents for mixed friction as a result of the operating
conditions.
Approvals / Specifications:Hydraulic Oil DIN 51524 ¨C HLP 22 Hydraulic Oil SEB 181 222 ¨C HLP 22
Characteristic data |
¡¡ |
¡¡ |
Approx. values |
ISO viscosity class |
DIN 51519 |
¡¡ |
VG 22 |
Viscosity at 0¡ãC |
DIN 51562 |
mm2/s |
220 |
Viscosity at 40¡ãC |
DIN 51562 |
mm2/s |
22 |
Viscosity at 100¡ãC |
DIN 51562 |
mm2/s |
4,3 |
Viscosity index |
DIN ISO 2909 |
¡¡ |
100 |
Colour pursuant to ASTM |
DIN 51578 |
¡¡ |
1,5 |
Density at 15¡ãC |
DIN 51757 |
kg/m3 |
880 |
Flash point |
DIN ISO 2592 |
¡ãC |
206 |
Pour point |
DIN ISO 3016 |
¡ãC |
-26 |
Ash, oxide |
DIN EN 7 |
g/100 g |
0.16 |
Ash, sulphate |
DIN 51575 |
g/100 g |
0.17 |
Coke residue using the |
¡¡ |
¡¡ |
¡¡ |
Conradson method with ash |
DIN 51551 |
g/100 g |
0.18 |
Content of asphaltenes |
DIN 51595 |
g/100 g |
m.n.n. *) |
Content of undissolved substances |
DIN 51592 |
g/100 g |
m.n.n. *) |
Water content |
DIN ISO 3733 |
g/100 g |
m.n.n. *) |
Neutralisation index, acid |
DIN 51558 Part 1 |
mg KOH/g |
0.5 |
Corrosive effect on steel |
DIN 51585 |
¡¡ |
¡¡ |
Corrosive effect on copper |
DIN 53538 Part 1 |
degree of corrosion |
0-B |
|
|
